Installs with screws

Column and Post Surrounds

P-Series | Mortarless Stone Innovations

An Easy way to create a beautiful Stone Column.  Designed specifically to fit a 6X6 (true dimension of 5 ½“ X 5 ½“), the Post Surround is engineered to be installed in a few simple steps.  The P-Series Post Surround elegantly combines elements of the Ledge and Dry Stack stone profiles, to create a stone that will match all M-Rock P-Series products and create a beautiful stone accent.

Available in the following matching color profiles: Charleston, Huntington, Hunter, Giles, Aspen, Horizon, Meridian, Cedar Branch, Reveal, Monroe, Misty and most other P-Series profiles.

The stones are labeled A, B, C, and D and fit together like puzzle pieces. On each row, stone A will always be your starting stone and stone D will always be your finishing stone. Simply attach stone A to your post then connect stone B and stone C to each side of the post, followed by stone D with only one screw each. Stone D will always mirror stone A on the post. Stack and repeat each additional row making sure that you rotate your starting stone A with each new row. Attach a Pyramid Post Cap to the top or use our custom designed Post Trims to finish off your project.

Take an ordinary post and turn it into…a beautiful stone column

*Please note, 16″x16″ column surrounds are intended for a column measuring approximately 15.5″x15.5″ (columns larger than this may be too large for the column surround product to wrap around the column accurately)

*Please note, 6″x6″ post surrounds are intended for a post measuring approximately 6″x6″ (Posts larger than this will be too large for the post surround product to wrap around the post accurately).

Designed to Fit Together

There are 4 different shaped stones. Each stone is designed to match up on the corners with 2 other stones.

Post Surround step one

1.) First Layer

Lock stone A onto the starter strip followed by stone B, stone C, and end with stone D directly across from stone A.

Post Surround First layer

2.) Building it Up

Rotate 1/4 turn and repeat by stacking the next row directly on top of the first row and continue with each additional row.

Post Surround step 2

3.) Finishing it Off

Our 6″ x 6″ Post Surrounds can be finished off with either our Column  Trim or our Column Cap.

Finishing It Off

M-ROCK’S Pyramid Post Cap is designed with a 2″ overhang to conceal the top of your last row of stone. Its Pyramid design is for both look and functionality!  Measures 13.75″ x 13.75″ x 3.5″ to the peak. Available in Brown and Gray. Designed for the 6″x 6″ post surround system.

M-ROCK’S Post Trim Rings are designed specifically for our 6″x 6″ Post Surrounds and allows your post to continue up.  2 piece set. Available in Brown and Gray.

*Please note, 16″x16″ column surrounds are intended for a column measuring approximately 15.5″x15.5″ (columns larger than this may be too large for the column surround product to wrap around the column accurately)

*Please note, 6″x6″ post surrounds are intended for a post measuring approximately 6″x6″ (Posts larger than this will be too large for the post surround product to wrap around the post accurately).

Walker Creek Barn

6″ x 6″ Post Surround covers 20″ on all sides. 6″ x 6″ is an inside measurement, not the finished exterior.

  • 6X6 Post Surround system is a four piece interlacing stone system.  Each row covers 5 linear inches.
  • Per Box: 4 rows, covering 20 linear inches of post.
  • Outside finished dimension of stone is roughly 11 ½ “ X 11 ½ “.
  • Accessories available to finish your project; Trim Ring Stones, Pyramid Caps, both available in brown or gray.

16″ x 16″ Column Surround covers 10″ vertically

  • 16″×16″ Post Surround 8 pieces per box and covers .83 LF.
  • Can be capped out using 24″×24″ Hearth Stone.
  • Dimensions: Each section is 5″ in height, 22″ in length, and approx. 3″ thick.